Using a remote control to operate a crane is a task that requires a high level of attention to safety and precision. Here are some steps and precautions for correctly using a remote control to operate a crane:

● Preparation before use

Check the equipment:

Ensure that the crane and remote control are in good working condition, and check the battery power and connection.

Check whether all parts of the crane (such as hook, wire rope, crane structure) are intact and have no obvious wear or damage.

Environmental check:

Ensure that the working environment is safe and there are no obstacles or people around.

Ensure that the ground in the operating area is flat and free of slipping risks, and pay attention to the surrounding wires and other equipment.

Confirm the operator:

Ensure that only trained and authorized personnel can operate the crane.

Ensure that the operator understands the functions and usage of the remote control.

●  Basic operation of remote control

Understand the functions of remote control:

Be familiar with the buttons and functions of the remote control, such as:

Up/down control

Forward/backward control

Left and right movement control

Emergency stop button

Hook opening and closing control (if applicable)

Start and shut down:

Press the start button and confirm that the indicator light is on, indicating that the remote control is started.

After work, turn off the remote control in time to avoid battery waste.

Operation process:

Lifting and lowering:

Press the lifting button to raise the load; after releasing the button, the load will stop.

Press the lowering button to lower the load; similarly, after releasing the button, the load will stop.

Move:

Operate the forward, backward, left and right buttons as needed, keeping your fingers flexible so you can adjust the direction at any time.

Slow operation:

When precise control is required, press the button as slowly as possible to avoid safety hazards caused by rapid movement.

● Safety Precautions

Maintain visual contact:

When operating, ensure that you always maintain visual monitoring of the load to avoid accidents caused by blocked vision.

If the vision is blocked, you can ask other personnel to assist in directing.

Use the emergency stop function:

If you find any abnormal situation, press the emergency stop button immediately to quickly stop all operations of the crane.

Load limit:

Follow the rated load limit of the crane, avoid overload operation and ensure safety.

Avoid interference during operation:

During operation, avoid interference from others and ensure a quiet and focused operating environment.

Regular maintenance and inspection:

Perform regular maintenance and inspection on the remote controller and crane to ensure the reliability and safety of the equipment.

● End the operation

Return to the original position:

After completing the task, ensure that the load is safely lowered back to the original position and confirm that the hook is in a safe position.

Shut down the equipment:

Press the shutdown button on the remote control to turn off the crane and the remote control.

By following these steps and precautions, you can ensure safety and efficiency when operating your crane with a remote control. Always stay alert to avoid possible accidents and dangers.

E-mail: jiaxin@cn-crane.net

WhatsApp: +8615295588555

Address: Room 507, Building 3, No. 88 Hongshan Road, Xuanwu District, Nanjing City